Grinder for high precision mechanical equipment, regular maintenance will extend its life.
1, the orbital plate parts should be lubricated regularly.
2, each machine should be cleaned after grinding is completed.
3, grinding wheel gap phenomena such as rupture and should be replaced.
Operation
1, the knife into the knife stage, the reinforced concrete cutting wheels amount of the adjustment tool stuck around 0.5-1.0cm, both ends of the knife stuck to the same amount, the top wire can be used to fine-tune. By magnetic electromagnetic device button switch is turned on, so that the adsorption stage in the knife blade. Adjust the wheel and blade angle position, as found in contact with the wheel blades should rotate into the Killer wheel to separate.
2 Turn on the power switch, the machine into normal working condition.
4, turn into the Killer wheel, so the slow speed of the blade are advancing to the inside until contact with the wheel, adjust the tightness of good blade contact with the wheel, so that the grinding wheel and blade work well.
Straight Knife Grinder is a mechanical splint Grinder, professional for sharpening a variety of bevel or straight blade, with the grinding time is short, a small amount of grinding, high precision grinding, sharp knife features , low price concessions, small print, packaging companies and individual users the ideal grinding equipment.
Device structure features
1 flat grinding head: German East Y series stainless steel flap disc three-phase asynchronous motor
2 Maximum grinding width: 180 mm with 22 ° prevail
3 grinding fixed travel speed
4 wheel manual feed
5 rack and pinion
6 cantilevered fuselage structure
7 Mechanical knife sets
8 turret rotation: Manual Transmission
9 Table rotation angle: 0 ~ ± 90 °